Yes, the Westin Signature Series Round Nerf Bars # 25-1025 fit your 1998 Jeep Grand Cherokee and this kit includes the required mounting hardware. No drilling is required; these are a direct bolt-on installation. Install instructions are linked for your reference. view full answer...
While we don't have a harness that plugs into the factory port of your 2020 Jeep Grand Cherokee that has a matching end for the factory brake controller we do have this type of solution for an aftermarket brake controller like the very popular P3 brake controller part # 90195. All you'd need is the install harness part # TK93VR to easily install this controller in your Grand Cherokee. This controller by the way would perform much better than any factory brake controller plus should cost... view full answer...
None of the hitches we currently offer for the 1993 to 1998 Jeep Grand Cherokee or 1993 Jeep Grand Wagoneer include wiring, but we do offer the wiring separately.
If your vehicle is a 1993 model Grand Cherokee or Grand Wagoneer, you would use wiring harness # C59496. If your vehicle is a 1994-1998 model, you would instead use wiring harness # 118349.
I am including links to the instructions for both wiring harnesses and the trailer hitch below, as well as some general information on... view full answer...
There is actually no hardware that comes with or is needed to purchase separately for the etrailer Trailer Hitch Receiver # e98901 or its counterpart, the Curt Trailer Hitch Receiver # C13182, both of which fit your 2019 Jeep Grand Cherokee (the only difference being the black matte finish of the etrailer hitch vs. the glossier black of the Curt).
The reason why is that the hitch will install with existing bolts on your 2019 Grand Cherokee, as you can see by the accompanying cut out of... view full answer...
For Class III trailer hitches like the Draw-Tite, # 75338, the ball mount, pin and clips is not included because a Class III hitch does not require a specific ball mount. Lower Class hitches do require a specific ball mount so for many of them we will include it.
There is always a recommended ball mount for a Class III hitch but in order to determine the right one for your needs you will want to measure for the rise or drop required to tow the trailer level. What you will do is measure... view full answer...
This question actually comes up a lot. The Rhino-Rack J-Style Kayak Carrier - Folding - Universal Mount Item # S512 is a complete carrier for 1 kayak meaning that it comes with the 2 J-style cradles pictured. I have included a link to a video review of this carrier for you. view full answer...
I spoke with my contact at CE Smith and the wood in the Carpeted Bunk Boards # CE27820 is a non-treated wood. The carpet though is marine grade carpeting. view full answer...
I would personally go with Roadmaster's stuff. They've had a really good track record in my experience and have been an industry favorite for a while.
So, for your 2023 Jeep Grand Cherokee you're going to want the Roadmaster Direct-Connect Base Plate Kit # RM77ZR for a base plate and the Roadmaster Nighhawk # RM-676 for a tow bar.
This tow bar will easily attach to the base plate using the direct connect brackets, has an integrated LED light for low light conditions, and has an 8K capacity... view full answer...
Dual-View Clip-On Towing Mirror Item # 11953 is sold in quantities of 1. So to get 1 for the passenger's side and 1 for the driver's side you would need to order 2. I have linked a video review of this mirror for you. view full answer...
The Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector - LED Bulb and Socket - Red # RM-152-LED-7 does not come with white LED bulbs and only red replacement LEDs are offered for it. We do have the Roadmaster Tail Light Wiring Kit with Bulbs # RM-155. The bulbs are white but not LEDs. view full answer...
Thank you for your recent orders for Draw-Tite hitch # 75338 and wiring for your 2006 Jeep Grand Cherokee.
All of the trailer hitches we offer include the hardware specified by the manufacturer's engineers. This is rarely (if ever) stainless steel. Hitch hardware is usually Grade 5 which provides both the shear strength and tensile strength needed to enable the hitch to meet its specifications when installed on a compatible vehicle. This hardware is given an anti-corrosive treatment so... view full answer...
Brake controllers come with a basic pigtail wiring harness for hardwire installation, or they can come with a connector made to join with a vehicle-specific wiring adapter on vehicles that have a specific port for brake controllers. Since your 2004 Jeep Grand Cherokee does NOT have such a port under the dash any brake controller you install will be a hardwired installation.
If the GC has no factory trailer socket at the rear then brake controller installation will require our all-inclusive... view full answer...
7-Way Molded Trailer End # 54006-009 does not come with the heat shrink butt connectors. You can add some for the smaller gauge wires using # DW05744-5. For the larger gauge power and ground wires you can use # DW05745-5. view full answer...
The correct Westin E-Series Round Nerf Bars for a 2014 Jeep Grand Cherokee is part # 23-3610 for silver or part # 23-3615 for black. These are complete kits with both bars and the hardware needed to attach them. view full answer...
Erickson Arched Loading Ramp # EM07464 is sold in quantities of 1. The set of 2 is # EM07464-2. Or we have other ramp set options. I have included a link to them for you. view full answer...
All of the LetsGoAero ArcHaus Camping Tent and Clip-On Interior Screen Room - 10' Long x 6' Wide x 6-1/2' Tall
Item # SAR024-031 that you referenced are all the same green as shown in the attached video. view full answer...
Hardware is included with the seat adapter, # RM-88150. If you are talking about the mounting post, that is part of the BrakeMaster assembly. If you are missing that part there is a kit you can use, # RM-450596. The pin that holds the post to the BrakeMaster is # RM-356997-00. view full answer...
Yes, the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # TK93VR must be purchased separately from the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195. The Plug-In Wiring Adapter is specific for your 2018 Jeep Grand Cherokee which is why we do not combined it with the brake controller. The Replacement Mounting Bracket Kit for Tekonsha Prodigy P3 Trailer Brake Controller part # TK5906 however comes with the above brake controller and will not need to be ordered... view full answer...